Yamaha YSP-900 owner manual Using the audio output being played back, 69 En

5Press TEST when you have completed all your adjustments.

TEST

Notes

•All the channel levels cannot be adjusted when the stereo playback or my beam is selected as the beam mode (see pages 46 and 47).

•FRONT L/R cannot be adjusted when the stereo plus 3 beam is selected as the beam mode (see page 41).

•FRONT L/R are automatically adjusted depending on the settings of the other channels when the stereo plus 3 beam or stereo playback is selected as the beam mode (see pages 41 and 46).

y

If the level of a particular channel cannot be adjusted, – –dB appears in the front panel display.

ADJUSTING THE AUDIO BALANCE

Using the audio output being played back

You can also manually adjust the channel levels while playing back an input source such as a DVD.

OFF

0 +10

CH LEVEL MENU

TV/AV

ENTER

YSP

TESTRETURN

1Set the operation mode selector to YSP to switch to the operation mode of this unit.

TV/AV

YSP

2Press CH LEVEL repeatedly (or press CH LEVEL and then / ) to select the channel you want to adjust.

The front panel display changes as follows.

CH LEVEL

or

CH LEVEL

ENTER

OPERATION ADVANCED

FRONT L +1.0dB

CENTER -2.5dB

FRONT R +1.0dB

SUR.R +2.0dB

SUR.L +2.0dB

SWFR --dB

English

69 En