MANUAL SETUP
TREBLE GAIN (Treble gain)
Use to adjust the high frequency output level of each channel.
y
If the reflection point of the front left and right or surround left and right sound beams is a curtain or other acoustically absorbent surface, you can achieve more effective surround sound by increasing the treble level for those sound beams.
■IMAGE LOCATION (Image location)
Use to adjust the direction from which the front left and right channel sound is heard so that the each sound can be heard closer to the center channel.
Use this feature to redirect audio signals if the sound coming from the front left and right seems unnatural, such as when your listening position is not the center of your listening room.
You can only adjust this parameter when 3 beam or 5 beam is selected as the beam mode (see page 40). Choices: ON, OFF
Setting range: 0% to 95%
Initial setting: 0%
Choices:
Initial setting: 0 dB
•FL adjusts the high frequency output level of the front left channel.
•FR adjusts the high frequency output level of the front right channel.
•C adjusts the high frequency output level of the center channel.
•SL adjusts the high frequency output level of the surround left channel.
•SR adjusts the high frequency output level of the surround right channel.
C)IMAGE LOCATION
. | OFF |
| )ON |
| L | C | R |
p
LEFT;;;;;;;;;;;0%
RIGHT;;;;;;;;;;0%
[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return
LEFT (Left)
Adjusts audio signals towards the left.
The higher the percentage, the louder the output from the center.
Without adjustment | With the front left |
channel adjusted |
d)TREBLE GAIN
. Front L;;;;;;;;0dB
Front R;;;;;;;;0dB
Center;;;;;;;;;0dB
Surround L;;;;;0dB
Surround R;;;;;0dB
[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return
RIGHT (Right)
Adjusts audio signals towards the right.
The higher the percentage, the louder the output from the center.
|
| With the front right |
Without adjustment |
| channel adjusted |
|
|
|
|
|
|
