ADJUSTING THE AUDIO BALANCE
You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more
Using the test tone
You can use the test tone feature to output a test tone from each channel to manually balance the channel levels. Use the test tone to set channel levels so that the volume level of each channel is identical when heard from your listening position.
OFF
0 +10
CH LEVEL | MENU |
TV/AV
ENTER
YSP
TESTRETURN
1Set the operation mode selector to YSP to switch to the operation mode of this unit.
TV/AV
YSP
3Press 
/ 
to select the channel you want to adjust.
The front panel display changes as follows.
TEST FRONT L
ENTER | TEST CENTER |
|
TEST FRONT R
TEST SUR.R
TEST SUR.L
TEST SWFR
Note
TEST SWFR is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 63).
2Press TEST on the remote control.
4Press 
/ 
to adjust channel volumes.
TEST FRONT L appears in the front panel display and a test tone is output from the front left channel.
TEST
VOL
TEST FRONT L
ENTER
Control range:
