MANUAL SETUP
■INPUT RENAME (Input rename)
Use to change the name of the input source in the OSD and the front panel display. Press an input selector button (TV, STB, DVD, VCR, or AUX) to select the component you want to change the name for and then perform the following procedure.
D)INPUT RENAME
DVD
[p]/[p]:Position [p]/[p]:Character [ENTER]:Return
1 Press 
/ 
to place the _ (underbar) under the space or the character you want to edit.
The _ (underbar) flashes.
ENTER
2 Press 
/ 
to select the desired character.
• You can use up to 8 characters for each input.
• Press 
to change the character in the following order or press 
to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *, +, etc.
ENTER
3Repeat steps 1 to 3 to rename each input.
4Press ENTER to exit.
The new names are registered, and the display returns to the previous screen.
ENTER
