Assembly Instructions Cont’d
Adjust Mower with Mechanical Lift
1.Remove clevis pin connecting rear pull rod (10) to the rear lift arm assembly (12).
2.Raise tractor lower
3.Remove clevis pin that connects clevis yoke (9) to front rockshaft (1).
4.Block mower frame (2) up against front lift stop
(4) and so rear lift stop (13) contacts tractor transmis- sion.
5.With tractor lower
1.Front rockshaft assembly
2.Mower frame
3.
4.Front lift stop
5.Pull rod
6.Upper rear lift link
7.Lower rear lift link
8.Rear rockshaft assembly
9.Adjustable clevis yoke
10.Rear pull rod
11.
12.Rear lift arm assembly
13.Rear lift stop
6.Rotate front rockshaft assembly (1) up and adjust clevis yoke (9) on pull rod (5) until clevis pin just slips in. Install clevis pin and secure with cotter pin.
7.Remove block from mower frame. The deck will drop slightly. Readjust clevis (9) and rear pull rod (10) so mower just contacts lift stops when
8.With tractor
Figure 38 Mechanical Lift Adjustment
MAN0137 (9/14/01) | Assembly 41 |
|
|