Assembly Instructions Cont’d
Install Gearbox Vent Plug
1.Remove and discard solid plug from top of gear- box cover.
2.Remove level plug (2) when filling and checking oil level.
3.Fill gearbox with SAE 90W oil until it reaches level hole in front of gearbox.
4.Reinstall level plug.
5.Install plastic vent plug (3) from bag of parts.
1.Gearbox
2.Level plug
3.Vent plug
13
DB2947A
2
Figure 35 Vent Plug Installation
Install Rear Lift Stop
1.Attach rear lift stop (1) to gearbox stand (3) with two bolts (4) and locknuts (5) as shown.
NOTE: Rear lift stops (1 & 2) are the same part, mounted differently for gear and hydro tractors.
1.Rear lift stop (Hydro)
2.Rear lift stop (Gear)
3.Gearbox stand
4.3/8 x 1" Bolt
5.3/8" Locknut
Figure 36 Rear Lift Stop Installation
MAN0137 (9/14/01) | Assembly 39 |
|
|
