Assembly Instructions Cont’d
PRE-DELIVERY CHECK LIST
(DEALER’S RESPONSIBILITY)
Inspect the equipment thoroughly after assembly to make sure it is set up properly before delivering it to the customer. The following check list is a reminder of points to inspect. Check off each item as it is found satisfactory, corrections are made, or services are performed.
___ Check all bolts to be sure they are properly torqued.
___ Check that all cotter pins and safety pins are properly installed. Replace if damaged.
___ Check and grease all lubrication points as iden- tified in “Service, lubrication information
___ Check the level of gearbox fluids before deliv- ery. Service, if required, as specified in the “Ser- vice, lubrication information.”
___ Check that blades have been properly installed.
DELIVERY CHECK LIST
(DEALER’S RESPONSIBILITY)
___ Show customer how to make adjustments and select proper PTO speed.
___ Check mower attitude and belt alignment.
___ Instruct customer how to lubricate and explain importance of lubrication.
___ Point out the safety decals. Explain their mean- ing and the need to keep them in place and in good condition. Emphasize the increased safety hazards when instructions are not followed.
___ Point out all guards and shields. Explain their importance and the safety hazards that exist when not kept in place and in good condition.
___ Present Operator's Manual and request that customer and all operators read it before oper- ating equipment. Point out the manual safety rules, explain their meanings and emphasize the increased safety hazards that exist when safety rules are not followed.
___ Explain to customer that when equipment is transported on a road or highway, a Slow Mov- ing Vehicle (SMV) sign should be used to pro- vide adequate warning to operators of other vehicles.
42 Assembly | MAN0137 (9/14/01) |
|
