Yard-Man YM155 MOTOR OPERATES SLOWLY OR WILL NOT OPERATE, BATTERY WILL NOT CHARGE, CUTTING ATTACHMENT WILL NOT ADVANCE LINE, BATTERY AND MOTOR

TROUBLESHOOTING
MOTOR OPERATES SLOWLY OR WILL NOT OPERATE
C A U S E	A C T I O N
Battery is not charged	Charge the battery
Overload protection switch has popped	Reset overload protection switch
BATTERY WILL NOT CHARGE
C A U S E	A C T I O N
No power to charger or battery	Check charger and charging station
Battery has failed	Replace the battery
CUTTING ATTACHMENT WILL NOT ADVANCE LINE
C A U S E	A C T I O N
Cutting attachment bound with grass	Stop the unit and clean cutting attachment
Cutting attachment out of line	Refill with new line
Inner reel bound up	Replace the inner reel
Cutting attachment dirty	Clean inner reel and outer spool
Line welded	Disassemble, remove the welded section
	and rewind the line
Line twisted when refilled	Disassemble and rewind the line
Not enough line is exposed	Push the Bump Knob and pull out line until
	4 inches (102 mm.) of line is outside of the
	cutting attachment

SPECIFICATIONS

BATTERY AND MOTOR

Motor ..................................................................................................................................................	12 Volt DC, 15 Amps
Battery.........................................................................................................................................	Sealed Lead-Acid, 12 Volt
Motor Wire Housing Tube............................................................................................................................	Aluminum Tube
Unit Weight (With battery, cutting attachment shield and D-handle) ......................................................	10.2 lbs. (4.63 kg.)
Cutting Mechanism.............................................................................................................................................	Bump Head
Line Spool Diameter......................................................................................................................................	3 in (76.2 mm)
Trimming Line Diameter .........................................................................................................................	0.080 in (2.03 mm.)
Cutting Path Diameter.................................................................................................................................	10 in. (254 mm)

15