Yeoman DEVON 50 Lighting the Appliance, Running The appliance, User Instructions, 3.2Solid fuel

USER INSTRUCTIONS

3.2Solid fuel:

—Burn only anthracite or manufactured briquette smokeless fuels listed as suitable for use with closed heating appliances

Do not burn bituminous coal, ‘petro-coke’ or other petroleum based fuels as this will invalidate the product guarantee.

	Fuel Consumption
Description	Kg/hour	Kg/hour
		Briquette
	Wood	Smokeless fuel
Yeoman Devon	4.8	2.1
Yeoman County 60	5.5	3.2
Yeoman County 80	6.6	4.5

3.4For advice on suitable solid fuels contact your local approved coal merchant*.

A number of factors can affect the performance of the appliance (see User Instructions, Section 6).

4.Lighting the Appliance

4.1For best results:

—Set air controls (see Diagram 3).

3 Airwash: Fully Open

Primary Air: Fully Open PR7519

4.2Fully open the Airwash control and the Primary air control.

—Place firelighters or paper and dry kindling wood on the grate.

—Light the paper or firelighters (see Diagram 4).

*In the U.K:

•Ring the Solid Fuel Association advice line on 0845 601

4406 for details

•Visit their web site at www.solidfuel.co.uk

4

—Leave the door slightly open as the fire establishes and the glass warms to avoid the build-up of condensation.

—Add larger pieces of solid fuel once the fire is established

Do not add too much fuel initially as this may smother the fire.

Do not load fuel above the log guard (see Diagram 5).

5

	Base of baffle
Log guard	PR8872
—Close the door.

Do not leave the door open as this may cause over-firing which can damage the appliance.

5. Running The appliance

Burning wood:

5.1This appliance gives out its heat in two ways:

—Directly into the room in which it is fitted through convection and radiation.

—Hot water to heat radiators and domestic hot water. The output to hot water varies depending on how

quickly the fuel is being burnt. Fore more detail see the graph on page 15.

5.2Only for use with recommended fuels, see Section 3 for full details.

—Close the Primary air control and use the Airwash to control the burn rate when the appliance is at optimum operating temperature (see Diagrams 6 & 7).

7