Configuration, Mail handler | York SMS Bridge specification

User Manual

Configuration

Service startup By default, the services do not automatically start when the application is launched. To start a service, you click it’s name and then click the Start service button. To avoid this step, select the Auto start option for each service as shown below.

Mail handler	Configure the MailHandler as follows.
configuration

	Step	Action

1Click MailHandler in the main screen.

2Click the Config button. The configuration screen opens.

3SMTP host: Enter the host name of the SMTP server used to send e- mail. Your system administrator can provide this information.

4From e-mail:Enter the “from” e-mail address.

	Continued on next page

Configuration	YORK Marine, Controls
Revision 1.3 · Updated: 070507	Author: Marc Anderson · Owner: RS
Project : SMS Bridge	Page 7 of 15
File: e:\york\sms bridge\manual\smsbridge-manual_13.doc

Page 7

Image 7

York SMS Bridge user manual Configuration, Configure the MailHandler as follows, Mail handler

Contents

SMS Bridge Table of Contents Introduction York Marine, Controls Introduction Services MailHandler serviceSMSHandler service SMSBridge service Requirements York Marine, Controls Requirements Action InstallationStep Action Mail handler ConfigurationConfigure the MailHandler as follows Configuration Configuration York Marine, Controls Setting to use is logif.reefers-online.comMail handler configuration SMS bridge configuration Configuration Baud rate Select SMS Handler configurationGSM char set Select GSM Operation Normal operation RefLine/RefBox configurationOperation York Marine, Controls Activity TroubleshootingTroubleshooting York Marine, Controls Monitoring MailHandler Problem Likely Cause SolutionSMSBridge SMSHandler Mail error messages Document Revision Record York Marine, Controls Rev Date Author Brief description of change Pages affected

Configuration

Mail handler

Configure the MailHandler as follows.

configuration

Step

Action

Configuration

YORK Marine, Controls