York SMS Bridge user manual Setting to use is logif.reefers-online.com, Mail handler configuration

User Manual

Configuration, Continued

Mail handler configuration (continued)

Step Action

5From name: Enter a name to identify the sender as the SMS Bridge system. The receiver sees this name in the inbox.

6Administrator e-mail:Enter the address for person monitoring the system.

7Click Save configuration to save the changes.

8Click the Test button to send a test message from the SMS Bridge to the administrator.

9Close the configuration screen and start the service.

SMS bridge configuration

The SMS Bridge is pre-configured with the settings that are required for most applications. If the service does not start, verify the settings as described below.

Step	Action
1	Click SMSBridge in the main screen.
2	Click the Config button. The configuration screen opens.
3	Log interface host: This is the host name for the GMS log interface.
	The setting to use is logif.reefers-online.com.
	In rare cases it may be necessary to enter the IP address for the
	interface. The IP address is currently 195.249.110.24 but is subject to
	change.
4	Log interface port: The value for this setting is 10000.
5	Close the window and start the service. The service is functioning
	correctly if STARTED appears in the Status field.
	Continued on next page

Configuration	YORK Marine, Controls
Revision 1.3 · Updated: 070507	Author: Marc Anderson · Owner: RS
Project : SMS Bridge	Page 8 of 15
File: e:\york\sms bridge\manual\smsbridge-manual_13.doc