York YZE024 THRU 060 warranty Physical and Electrical Data, YTG-L-0408, Model, request

246750-YTG-L-0408

Physical and Electrical Data

MODEL		YZE02411	YZE03611		YZE04811	YZE06011
Unit Supply Voltage			208-230V, 1φ, 60Hz
Normal Voltage Range 1				187 to 252
Minimum Circuit Ampacity		18.6	24.7		27.9	37.9
Max. Overcurrent Device Amps 2		30	40		45	60
Min. Overcurrent Device Amps 3		20	25		30	40
Multi-stage Compressor		Yes	Yes		Yes	Yes
Compressor Type		Scroll	Scroll		Scroll	Scroll
Compressor Amps	Rated Load	13.7	18.6		21.2	29.2
	Locked Rotor	52	82		96	118
Crankcase Heater		No	No		No	No
Fan Motor Amps	Rated Load	1.5	1.5		1.5	1.5
Fan Diameter Inches		22	22		22	22
	Rated HP	1/4	1/4		1/4	1/4
Fan Motor
	Nominal RPM	850	850		850	850
	Nominal CFM	3,250	3,300		3,050	3,100
	Face Area Sq. Ft.	17.15	20.58		20.58	20.58
Coil
	Rows Deep	1	1		2	2
	Fins / Inch	22	22		22	22
Liquid Line Set OD (Field Installed)		3/8	3/8		3/8	3/8
Vapor Line Set OD (Field Installed)		3/4	3/4		7/8	7/8
Unit Charge (Lbs. - Oz.) 4		8 - 14	8 - 8		14 - 8	14 - 0
Charge Per Foot, Oz.		0.62	0.62		0.67	0.75
Operating Weight Lbs.		270	290		310	315

1.Rated in accordance with ARI Standard 110, utilization range “A”.

2.Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.

3.Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection .

4.The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.

				All dimensions are in inches. They are subject to change
				without notice. Certified dimensions will be provided upon
				request.
							Dimensions			Refrigerant
					Unit					Connection
								(Inches)
					Model					Service Valve Size
						A		B	C	Liquid	Vapor
		A
					024	33-1/2		37	31		3/4”
					036	39-1/2		37	31	3/8”
					048	39-1/2		37	31		7/8”
		C	B		060	39-1/2		37	31		7/8”*
VAPOR	3-1/8
LIQUID		6-1/2			* Adapter fitting required for 1-1/8” line set.
2-3/8

2 Johnson Controls Unitary Products