The Cell Number is got from the site survey operation by the doing ¡°i wli st ¡±command.
We recommend that user uses the following scenario under the Managed (Infrastructure) or Adhoc mode. One can first do the site survey command by the following command:
iwlist ethX scanning
Then, associate with the AP with the Cell number got from the iwlist command.
iwpriv ethX connect <Cell Number>
3.4.7 Dynamical Region Setting(For 802.11b/g only)
From ver 1.5, you can dynamically change the region settings. With different regions, the allowed channels are different. The private commands to get/set region information includes :
1.get_Region : To get the current region setting iwpriv ethX connect <Cell Number>
2.set_Region : To set the region
iwpriv ethX connect <Cell Number>
RegionI | Region String | Chann | Countries |
D |
| el |
|
1 | USA | USA,Canada,Argentina,Brazil,Ukraine,China,Hong | |
|
|
| Kong |
|
|
| ,Korea,NewZealand |
2 | Taiwan/Euro | Taiwan, Europe, Spain, Austria, Belgium, | |
| pe |
| Switzerland, Australia |
3 | France | France, Singapore | |
4 | Japan | Japan | |
5 | Israel | Israel | |
6 | Mexico | Mexico | |
| The table of region id and region string | ||
3.4.8 Activate MIC Fail Counter Measure Feature
The feature will disable the network connection for one minutes when you get two MIC fail frame in one minute. The feature is initially disabled. You can activate the feature by using the apdbg tool.
apdbg ethX s_mic_cnt 0 1
8
