iwconfig ethx mode master | // Set to AP mode |
iwconfig ethx essid ssid | // Set ssid |
iwpriv ethx set_mac_mode mac_mode //Ref section 3.4.4 Set MAC mode
iwconfig ethx channel channel# | // Available channel # is1,2,3,4..etc |
3.6 Working with Linux WPA supplicant
Note: I do the following procedure in Fedora Core2, for other distribution package, you may need install additional libraries(ex. openssl) required to build the wpa supplicant..
3.6.1 Setup the Linux wpa supplicant
-Copy wpa_supplicant.tar.gz file into a subdirectory on Linux system(e.g:/root).
-Unzip it by using command:
tar zxvf wpa_supplicant.tar.gz
Then, a subdirectory of wpa_supplicant/ will be created under the current directory.
-Enter subdirectory wpa_supplicant/
-Delete the original .config file by:
rm ¨f .config
-Edit Makefile, make sure the following statements in mkconfig: section:
echo CONFIG_IEEE8021X_EAPOL=y >> .config echo CONFIG_EAP_MD5=y >> .config
echo CONFIG_MSCHAPV2=y >> .config echo CONFIG_EAP_PEAP=y >> .config echo CONFIG_EAP_TLS=y >> .config
echo CONFIG_DRIVER_WEXT=y >> .config
echo CONFIG_WIRELESS_EXTENSION=y >> .config echo CONFIG_DRIVER_ZYDAS=y >> .config
-Create the new .config file by: make mkconfig
-Now, we can build the Linux wpa supplicant by entering following command: make
After make process completed, A executable file wpa_supplicant created.
- To create a WPA PSK connection, please modify the configuration file (For detailed
10
