Z Microsystems 14 manual Reference, LED Indicator Timing Guide

Reference

LED INDICATOR

TIMING GUIDE

The Power Management feature of the LCD monitor is comprised of three stages:

1.On (green)

2.Standby, Suspend or Active Off (amber/green)

3.Out of Range (amber)

The monitor is a multi-frequency monitor. It operates at horizontal frequencies between 31.25KHz and 60.24KHZ, vertical frequencies between 56Hz and 75Hz. Because of its microprocessor-based design, it offers auto-synchronization and auto- sizing capabilities. The monitor offers

15pre-programmed settings that are listed in the following table.

These preset modes cover most of the common video modes supported by popular graphics adapters. However, each adapter’s implementation of these video modes may vary slightly in timing. If it is necessary to make minor display adjustments (horizontal and vertical position and horizontal position), refer to the On-Screen Display section of this manual for instructions.

18

Doc# 27-0001UM Issued 7/99 Rev. 1.2