Z Microsystems 14 manual Install Hardware, Command Console

INSTALL HARDWARE

·Install the slide assemblies to the rack by installing three screws (V) to the front and three screws (W) to the rear.

·Tighten the hex nuts (U) that were installed in the previous page.

·Install the command console (FF) into the rack slides.

U.01-91802 Nut 8-32 Nylon Hex

V.01-92087 Scr, 10-32 x .375 Low Hd

W.01-92097 Scr, 10-32 x .625 Pan Hd

FF. Command Console

29

Doc# 27-0001UM Issued 7/99 Rev. 1.2