Z Microsystems 14 manual If using Macintosh, need Mac adapter

Reference

TIMING GUIDE

The monitor is not limited to these preset factory-timing modes. In fact, because the monitor is multi-scan- ning, it can accept any signal within its frequency range of 31.25KHz - 60.24KHz horizontal and 56Hz - 75Hz vertical.

If it is desired to use one of the preset timing modes, refer to the video card manufacturer’s installation guide for instructions on how to make these changes. The video card controls the refresh rate. Most video cards provide software utility or hardware DIP switches that allow to change the frequency used for each resolution.

*If using Macintosh, need Mac adapter.

19

Doc# 27-0001UM Issued 7/99 Rev. 1.2