6. Select the programme and start it

Turn the programme selector dial clockwise to the required wash programme and press the start/stop button : the operating pilot light comes on and the machine starts to operate.

7. At the end of the programme

The machine stops automatically, the operating pilot light goes out.

If you have selected a gentle programme with the anticrease option , drain the water before opening the door.

It is normal to have to wait for about 2 minutes before being able to open the door to allow the safety lock to release.

Press the start/stop button again.

Remove the laundry.

Turn the drum by hand to make sure it is completely empty, so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.

Release any buttons which have been pressed.

Turn the water tap off and unplug the machine.

Leave the door ajar to air the machine.

P0218

P0412

ENGLISH

35

Page 16
Image 16
Zanussi FL 1014 V1 instruction manual Select the programme and start it, At the end of the programme