USE

Control panel

1

2

3

4

5

6

7

8

9

1 Programme chart

 

 

 

5 Half load button

 

 

There is a programme guide in Spanish language on the handle of the detergent dispenser drawer.

2 Spin speed selector dial

This dial has the following positions:

1000 = MAX to 300 = MIN

= no spin

For linen and cotton items you can select a spin speed from 1000 to 300 rpm. For synthetics, delicates and wool from 550 (MAX) to 300 rpm (MIN). In the intermediate positions the machine will spin at decreasing speeds.

3 On/Off button

Press this button to start the machine: the «pilot» light will come on. The same button is used to switch the machine off.

Before selecting a programme or changing an ongoing programme the machine must be switched off by depressing the same button.

4 Intensive rinse button

By depressing this button on programmes for cotton and linen the machine will rinse with more water.

To be used in areas where the water is very soft or for people allergic to detergents or who have very delicate skin.

Select this button to reduce water consumption on the rinse cycle when washing a smaller load of cottons or linens (max. load size=2.25 kg).

6 Rinse hold button

Press this button to make the machine stop with water in the drum after the synthetic or delicate wash cycles.

This prevents any creasing which may take place if the clothes are left damp in the drum. When it is convenient for you to empty the machine, simply press this button again so that the machine can proceed to drain and spin, or turn the dial to the drain programme "N".

7 Temperature selector dial

Turn this dial to select the washing temperature. Position = cold wash.

8 Operating pilot light

This light is on whilst the machine is operating and goes out at the end of the programme.

9 Programme selector dial

To select the required programme, turn this dial clockwise until the programme letter is exactly opposite the pointer.

28

Page 9
Image 9
Zanussi FL 1014 V1 instruction manual Use