Operation
Hob burners
ΦTo light a burner:
-Push the electric ignition button which is marked with a little spark (
).
-At the same time push in and turn the relevant control knob anticlockwise to maximum position.
-Then adjust the flame as required.
If the burner does not ignite, turn the control knob to zero, and try again.
When switching on the mains, after installation or a power cut, it is quite normal for the spark generator to be activated automatically.
To ensure maximum burner efficiency, you should only use pots and pans with a flat bottom fitting the size of the burner used (see table).
Burner | minimum | maximum |
| diameter | diameter |
|
|
|
Large (rapid) | 180 mm. | 260 mm. |
120 mm. | 220 mm. | |
Small (Auxiliary) | 80 mm. | 160 mm. |
|
|
|
If you use a saucepan which is smaller than the recommended size, the flame will spread beyond the bottom of the pan, causing the handle to overheat.
As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering.
Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite.
If the control knobs become difficult to turn, please contact your local Service Force Centre.
Gas oven and Electric grill
Oven Function Control Knob
λOven switched off
λ - max Range of temperature regulation for gas oven
Grill - The heat comes only from the top element
240
Grill function pilot light
The grill function pilot light will come on when the oven function control knob is turned to 
.
Oven light push button 
This button will turn the oven light on.
200
140
160
5
