Zanussi ZCM900X manual Something not Working, Symptoms Solutions

SOMETHING NOT WORKING

If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Force Service Centre.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

Symptoms		Solutions
1. No burner ignition	Check that:
	￿￿	Gas supply is completely open
	￿￿	The position of gas pipe is right
	￿￿	The burner is not wet
	￿￿	The burner cap and ring burner have been
		replaced correctly after cleaning
2. The gas ring burns unevenly	Check that:
	￿￿	The main jet is not blocked and the ring
		burner is clean of food particles
	￿￿	The burner cap and ring burner have been
3. The oven does come on		replaced correctly after cleaning
	Check that:
	￿￿	a cooking function/temperature have been
4. Cooking results are not satisfactory		selected;
	Check that:
	￿￿	the thermostat is placed correctly;
5. The oven smokes	￿￿	the cooking time is adapted;
	Check that:
	￿￿	the oven does not need cleaning;
	￿￿	the meal does not overflow;
	￿￿	there is no excessive fat / juice projection on
6. The oven does not work		the oven sides.

Check that:

￿￿the appliance is not unplugged;

￿￿there is no power break.

￿￿the fuse connections are intact.

If after these checks, the appliance still does not operate correctly, contact your local Service Force Centre. When you contact the Service Centre, they will need the following information:

1Your name, address and postcode.

2Your telephone number

3Clear and concise details of the fault

4The model and serial number (see rating plate*)

5Date of purchase

*The rating plate can be found on the front flap of the storage compartment.

14