Zanussi ZCM900X manual Oven Cavity, Burners, Replacing the Light Bulb

Models: ZCM900X

1 28
Download 28 pages 59.49 Kb
Page 13
Image 13
Oven Cavity

Oven Cavity

The enamelled oven cavity is best cleaned whilst the oven is still warm.

Wipe the oven over with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner.

Hob

After every use wipe with a soft cloth well wrung out in warm water to which a little washing up liquid has been added, avoiding any leakage through the holes of the hob. Rinse and dry with a soft cloth.

To remove more stubborn stains, wet and leave to dissolve, do not scratch and avoid the use of abrasive or caustic products that could damage the enamel.

Burners

The burner caps and crowns can be removed for cleaning.

Wash the burners caps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well-moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove.

After cleaning, be sure to wipe dry with a soft cloth.

Always ensure that the burner caps and crowns are replaced in the correct positions.

Replacing the Light Bulb

To replace the oven bulb, unscrew the protection cap in the roof of the oven and replace the bulb with one of the same characteristics.

Voltage

230-240V (50Hz)

Power

W 25

Connection size

E14

Burner cap

Burner

ring

Ignition

13

Page 13
Image 13
Zanussi ZCM900X Oven Cavity, Burners, Replacing the Light Bulb, The burner caps and crowns can be removed for cleaning