Supply Cable
Note:
Check the rating plate for the value of the connected load to establish the fuse rating.
The cable supplied with the appliance is an X type connection (in compliance with standards
If the supply cable becomes worn or damaged, it must be replaced by the manufacturer or its Service Agent with a cable of the same type.
If the supply cable is replaced you must ensure that the earth wire is longer than the live and neutral wires and complies with all warnings regarding electrical connection.
Before connecting check that:
fuse and household electric installation can bear the charge of the appliance (see rating plate);
The plug used for connection is easily accessible once the appliance is installed.
Warning
The supply cable must not run across the back of the oven.
Y E S
p o w e r c o rd
N O
p o w e r c o r d
20
