Zanussi ZDG 58 What is wrong and why?

Problem

Having difficulty cleaning any part of the oven.

Check

lCheck that you are following the instructions for care and cleaning

(See page 28).

Problem

The oven lights do not work.

Check

lCheck that the oven is not set for automatic cooking. The lights will

illuminate when cooking begins.

lIf you have had your oven for some time you may need to replace

an oven light bulb. (See page 34).

Problem

The timer does not work.

Check

lCheck that the timer instructions are being closely followed.

(See page 24).

Problem

The oven or grill burner flame is unstable/noisy.

Check

lCheck that the burner flames stabilise after a few minutes. It may be

that the appliance needs to adjust to room temperature.

Z D G 5 8

What is wrong and why?

Contents

Main Introduction Z D G 5 8 For your safety Contents Contents Page General information The cooling fan for the controls Z D G 5 8 General information Ignition Please note: Oven lights Connecting to the electricity supply General information Page Page The grill Heat control Cooking positions Preheating Putting food on the grid Grill shelf The grill pan and handle Plate warming The oven Heat zones Preheating Oven shelves Baking trays and dishes Condensation Page Oven cooking chart Page Page Slow cooking Food preparation-slow cooking Page Page The electronic timer To set the time of day To use the minute minder Automatic control Setting the controls for automatic use To cancel an automatic programme Hints and tips for automatic cooking Care and cleaning Please note: The grill The oven Oven cleaning cycle Cleaning between the outer and inner door glass To remove the outer glass What is wrong and why? What is wrong and why? Replacing an oven light bulb light bulb Replacing an oven Service and spare parts Help us to help you Service and spare parts Service Customer care department Service and spare parts The Gas Consumers' Council Peace of mind for twenty-four months Guarantee OVEN Natural Gas L.P.Gas IMPORTANT - SAFETY REQUIREMENTS PROVISION FOR VENTILATION LOCATION OF APPLIANCE INSTALLATION 1. FITTING THE APPLIANCE AND CABINET Page INSTALLATION FITTING THE APPLIANCE AND CABINET. 2. CONNECTION TO ELECTRICITY SUPPLY Page 3. PRESSURE TESTING 4. RE-ASSEMBLE THE APPLIANCE 5. CHECKING THE GRILL