The electronic timer
Please note that this is a 24 hour clock, for example 2pm is shown as
1400.
In the following pages we explain how to
set the controls. Read through them until
you're familiar with the procedure. We have
supplied a plastic card as a quick reference
when setting the timer.
If the oven is switched off on the wall, or there is a loss of power, the
clock will stop and you will not be able to use the oven. When you first
switch the electricity supply on, the timer display will flash.
During the hours of 10p.m. (22.00hrs) and 6a.m. the display will glow
dim. If a function is selected the display will glow brighter until the
function is complete. It will then revert back to the dim mode.
To set the time of day
Turn and hold the selector knob to clock.
The cookpot symbol ( ) is showing.
Set the correct time by turning the setting
knob clockwise. Adjust the time by turning
the setting knob in either direction. The
selector knob will return to 'manual' when
you let go of it.
To use the minute minder
Turn the selector knob to 'timer'
Turn the setting knob clockwise until the
display shows the time you want. Our
diagram shows the timer set to 5 minutes.
When you are using the minute minder you can make the clock show
the time of day by turning the selector knob to 'manual'.
At the end of the timed period an alarm will sound. Switch off the alarm
by turning the selector knob to 'manual'.
24
Z D G 5 8
The electronic timer
Selector Setting knob
Cookpot symbol