Manuals / Zanussi / Kitchen Appliance / Dishwasher

Zanussi ZDT 420 user manual

Models: ZDT 420

1 28

Download 28 pages 52.31 Kb

Page 28

Image 28

www.electrolux.com

www.zanussi-electrolux.co.uk

156991190-00-06122007

Page 28

Image 28

Contents

Page Contents Thank you for selecting our applianceSafety information General safetyChild safety Correct useInstallation Control panelSetting mode Always remember that when performing the following operationsselecting a washing programme setting the water softener level Digital display Function buttonsCancel the washing programme in progress Programme selection buttons Half load buttonStarting the washing programme 1. Press the On/Off buttonAudible signals Audible signalsDelay start button Indicator lightsDeactivation/activation of the audible signals Washing programmesFirst use Auto washing programmeProgramme Degree of soilWhen using tablets that integrate rinse aid and detergent Set the water softenerSetting the water softener manually see table Setting electronicallysetting Adjusting the water hardnessFilling with dishwasher salt ExamplesAdjusting the dosage of rinse aid Filling with rinse aidTop up the rinse aid when the light on the control panel illuminates Open the lidLoad cutlery and dishes are not suitable For washing in the dishwasher the following cutlery and dishesare of limited suitability upper basket Adjusting the height of the upper basketlower basket Observe the manufacturer’s dosing and stor- age recommendations Use of detergentTo lower the basket to the original position proceed as follows Care and cleaning Cleaning the filtersUnloading the dishwasher Detergent tabletsCleaning the spray arms External cleaningInternal cleaning Prolonged periods of non- operationFrost precautions Environmental concernsMoving the machine Packaging materialSomething not working iations of the power supply and the amount of dishes Consumption valuesThe wash results are not satisfactory Technical data Hints for test institutesConsumption values ProgrammeInstallation Water connectionFull load 12 standard place settings cup racks position AInlet hose Drain hoseConnect the inlet hose to a water tap with an external thread of 3/4” Connect drain hose to the sinkFitting under a counter Electrical connectionLevelling