Programme selection buttons
Half load button
6
•Starting the washing programme:
1.Press the On/Off button.
2.To select a programme, press either one of the two programme selection buttons, the indicator lights of the programme selection buttons start to flash and the number corresponding to the last performed washing programme will appear in the digital display.
Using these two buttons you have an increasing ( ) or a decreasing () order in the selection of the programme (see "Washing programmes" chart for the number of the programme).
Example:
–Button (increasing order) : 1→2→3 etc...
–Button ( decreasing order) : 1←7←6 etc...
3.Close the dishwasher’s door, the programme will start automatically.
IMPORTANT!
•Cancel the washing programme in progress:
1.Open the dishwasher door.
2.Press the function buttons 2 and 3 simultaneously for about 2 seconds, the indi- cator lights of the programme selection buttons will start flashing. After about 2 seconds the in- dicator lights of the programme selection but- tons will illuminate with a fixed light and 2 horizontal lines (-
3.Switch off the machine by pressing the On/Off button or select a new washing programme (check that there is detergent in the detergent dispenser.
The option must be linked to the selection of a washing programme. (See "Programme table" chart). When selected, the corresponding light illuminates. Load dishes in both baskets (lower and upper).
When using the option reduce the dosage of detergent which is normally used for a complete load.
