Inlet hose
Connect the inlet hose to a water tap with an external thread of 3/4”.
The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks.
Drain hose
Connect drain hose to the sink.
Required height: 30 to 100 cm above bottom of the dishwasher.
Ensure that the hoses are not kinked, crushed or en- tangled.
When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Fail- ure to remove all the mem- brane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot.
If you use a drain hose extension the total length should not be longer than 4 metres. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.
25
