•Carry out a gas tightness test after connect- ing to the gas supply.
•The gas bayonet connector must be fitted in the enlarged area indicated.
•Take into account that it must be possible to pull the appliance forward sufficiently. En- sure the hose does not become trapped when pushing the appliance into position.
IMPORTANT!
Flexible tubing used must comply with BS. 669 current edition.
LPG Flexible connections must be a type suitable for L.P.G and capable of operation up to 50 mbar and carry a red stripe, band or label.
Fixing the stability chain
To further prevent tilting and for safe usage of the appliance a stability chain should be used. Unscrew the screw shown in the figure. Then, align the first loop of the chain with the hole and assemble with the screw so that the chain stands in its place safely. Check the assembly by gently pulling the chain from its loose end. Fix the loose end to the rear wall as appropriate for your kitchen. The chain is not supplied within the package of the appliance, but can easily be supplied from the market.
The battery
WARNING!
After unpacking, install the battery in the battery box as explained below. The battery is placed in the document bag.
1.The battery is located on the left hand side of the front plinth.
2.To gain access to the battery, open the main oven door and lift up the battery holder lid.
3.Fit the new battery ensuring (+) terminal is next to the (+) sign on the battery.
4. Close the lid of the battery holder.
Pressure testing
1.The Rapid injector is used as a pressure test point.
2.Connect the pressure gauge to the Rapid injector.
31
