Zanussi ZOB 691 manual Oven Shelves and Shelf Supports, Replacing The Oven Light, electrolux

Models: ZOB 691

1 68
Download 68 pages 20.41 Kb
Page 26
Image 26
26electrolux
To replace the faulty bulb:
Proceed as follows:

26electroluxOven Shelves and Shelf SupportsRinse well and dry with a soft cloth.The shelf supports can be removed for easy cleaning.2. disengage the rear hook and take off the shelf support;Replacing The Oven LightDisconnect the appliance-Electric power: 15 W/25 W,-Resistant to temperatures of 300°C,These bulbs are available from your local Service Force Centre.1. Ensure the oven is isolated from the electrical supply.2. Push in and turn the glass cover anticlockwise.3. Remove the faulty bulb and replace with the new one.4. Refit the glass cover and restore the electrical supply.Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

Oven Shelves and Shelf Supports

To clean the oven shelves, soak in warm soapy water and remove stubborn marks with a well wetted soap impregnated pad.

Rinse well and dry with a soft cloth.

The shelf supports can be removed for easy cleaning.

!

1. remove the front screw while keeping the shelf support in position with the other hand;

2. disengage the rear hook and take off the shelf support;

3. once the cleaning is carried out, refit the shelf supports following the procedure in reverse.

Please, ensure the retaining nuts are secure when refitting the shelf support.

Replacing The Oven Light

Disconnect the appliance

If the oven bulb needs replacing, it must comply with the following specifications:

-Electric power: 15 W/25 W,

-Electric rate: 220 V (60 Hz),

-Resistant to temperatures of 300°C,

-Connection type: E14.

These bulbs are available from your local Service Force Centre.

!

1. Ensure the oven is isolated from the electrical supply.

2. Push in and turn the glass cover anticlockwise.

3. Remove the faulty bulb and replace with the new one.

4. Refit the glass cover and restore the electrical supply.

26

Page 26
Image 26
Zanussi ZOB 691 manual Oven Shelves and Shelf Supports, Replacing The Oven Light, electrolux, Disconnect the appliance