Zanussi ZOU 592 user manual When the oven is first installed, To set the correct time of day

When the oven is first installed

Remove all packaging, both inside and outside the oven, before using the oven.

When the oven is first connected to the electrical supply, the display will automatically show 12:00 and the

symbol will flash.

Ensure the correct time of day is set before using the oven.

To set the correct time of day:

a) while the symbolis flashing , set the correct time of day by pressing buttons “ “ or “ “ (Fig. 1).

The time arrow symbol will disappear about 5 seconds after the correct time is displayed (Fig. 2).

b) if the symbolis not flashing anymore, press

button twice (Fig. 3).

Then, proceed as described in point a).

Before first use

Before using for the first time, the oven should be heated up without food.

To do that, proceed as follows:

—press button to switch on the oven.

—press button twice and select the

"Conventional Cooking" function (Fig. 4).

—set the temperature to 250 °C using the increasing push button ““.

—Allow the oven to run empty for approximately 45 minutes.

—open a window for ventilation.

This procedure should be repeated with the "Fan

Cooking" and "Full Grill" function for approximately 5-10 minutes.

During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing.

electrolux 37

Fig. 1

Fig. 2

Fig. 3

Fig. 4

37