Zanussi ZT 617 Maintenance And Cleaning, Cleaning the Central Filter, Cleaning the Large Filter

Models: ZT 617

1 24
Download 24 pages 47.03 Kb
Page 14
Image 14
MAINTENANCE AND CLEANING

MAINTENANCE AND CLEANING

Cleaning the Central Filter

(After each wash)

Scraps of food can sometimes accumulate in the cen- tral filter (A) and should be periodically removed by rinsing the filter under running water.

Internal and External Cleaning

You must ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend the use of a specific dishwasher

A

MA04

To remove the filter, simply pull it outward by the handle.

cleaner every 3 months, or run a wash programme without dishes using detergent.

Check that the spray arm nozzles are not obstructed.

To remove the bottom spray arm, pull the arm upwards holding one end. To clean the nozzles of the top spray arm, slide out the top basket whereby the spray arm will become accessible. If you need to remove it, take away the SID dispenser (see instruc- tions below) and unscrew the retaining nut.

Once cleaned, refit the filter by pushing it back to its original position until it engages.

Cleaning the Large Filter

(Every two months)

If necessary clean the large filter (B) on both sides under running water, using a brush.

Clean the external surfaces of the machine and control panel with a soft damp cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvents (acetone, trichloroethylene etc.).

Check that the Super

Intensity Dispenser (SID) is

90°

B

C

MA05

To take it out remove the spray arm by pulling it up- ward on one side, turn the column (C) anticlockwise by 90° and then slide out the filter.

Once cleaned refit it follow- ing the above instructions in reverse order.

not clogged with detergent residue or soil. If necessary, rinse it under running water after having removed it from the basket by twisting it anticlockwise and pulling it upwards.

Refit the dispenser by following the above instructions in reverse order. Fasten it back onto the support by

Ensure the filter is in its original position, the handle of filter (A) should be pointing towards the front of the appliance.

Caution: the dishwasher must not be used without filters.

Incorrect repositioning of the filters will produce poor washing results.

Cleaning of the filters is vital to ensure correct operation of the machine.

turning it clockwise.

Important: Never use your dishwasher without the SID dispenser.

PMA10GB

14

Page 14
Image 14
Zanussi ZT 617 manual Maintenance And Cleaning, Cleaning the Central Filter, Internal and External Cleaning