Zanussi ZUG 78 manual Installation Instructions, Things You Need To Know, Note House Circuit

Models: ZUG 78

1 48
Download 48 pages 41.4 Kb
Page 41
Image 41
INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

THINGS YOU NEED TO KNOW

THINGS YOU NEED TO KNOW WARNINGS:

In the interest of safety this appliance must be installed and / or serviced by a competent person (Corgi registered). Safety may be impaired if installation is not carried out in accordance with these instructions.

This cooker must be earthed.

Do not remove the screws from the earth tab extending from the oven mains terminal block (Fig. 1).

Before connecting the cooker make sure that the gas type and the voltage of your electricity supply is the same as that indicated on the rating plate. The rating plate can be seen by opening the grill /top oven door and looking below the oven door seal.

Do not alter the electrical circuitry of this cooker.

NOTE: HOUSE CIRCUIT

Earth leakage / continuity tests must be carried out before the cooker is connected to the mains supply and re-checked after fitting.

NOTE: It is good practice to:

Fit an Earth Leakage Circuit Breaker to your house wiring.

Wire your appliance to the latest IEE regulations.

THINGS TO NOTE

LOCATION OF APPLIANCE

The appliance may be located in a kitchen, a kitchen/diner or bedsitting room, but not located in a bathroom or shower room.

L.P.G. cookers MUST NOT be installed below ground level i.e. in a basement.

It is essential that there is a minimum clearance of 2mm between the top surface of the appliance and the inside top of the cabinet.

This cooker is designed to be fitted between cabinets with the recommended dimensions as shown in Figs. 2 and 3.

Fig.1

Fig.2

Fig.3

41

Page 41
Image 41
Zanussi ZUG 78 manual Installation Instructions, Things You Need To Know, Note House Circuit, Things To Note