Zebra Technologies QL+ Using the Accessories, Belt Clip, Kickstand

Using the Accessories

Belt Clip

Refer to Figure 15. All QL Series printers are equipped with a belt clip as standard. To use: hook the clip over your belt, and ensure that the clip is securely attached to the belt. The belt clip will pivot to allow you to move freely while wearing the printer.

The retainer for the Belt Clip has a strain relief feature which can be used with the communications cable. Refer to the section on Connecting the Printer.

Clip printer to belt

Printer can pivot freely

Figure 15: Using the Belt Clip

Kickstand

Refer to Figure 16 . The Kickstand option allows users to use the printer on a desktop. To use the optional Kickstand: Flip the Kickstand on the back of the printer open until you feel a slight detent. The printer will now sit at approximately a 30º to 45° angle on a desktop depending on the printer model.

The retainer for the Kickstand has strain

relief features which

can be used with the

communications ca-

ble. Refer to the section on Connecting the Printer.

Figure 16: Using the Kickstand

continued

43

QL Series User Guide