MM4 Mobile Mount Safety and Installation Guide
Introduction
NOTE: Zebra Technologies Corporation is not liable for personal injury or damage to any equipment caused by the improper mechanical installation of this equipment or improper connection to any power source. Check with the vehicle manufacturer or dealer for installation assistance in order to prevent the voiding of the vehicle warranty or maintenance contract.
The MM4 Mobile Mount system is designed to integrate a Zebra™ QLn420, QL 420 or a P4T series mobile printer and optionally a Zebra DC/DC power supply into the electrical and mechanical systems of a vehicle. Once installed it will provide intelligent charging capabilities for the printer’s battery and protection from accidental damage to the printer.
The DC/DC modules are supplied separately from the MM4 installation Kit (p/n
The installation and safety warnings in this manual pertain only to the mechanical installation of the MM4 mobile mount. Follow them closely to ensure safe, reliable performance of the QLn420, QL 420 or P4T Printer in a mobile environment
It is important that the vehicle’s electrical system be functioning properly. The vehicle’s charging circuit must work properly and
The vehicle charging circuit must neither undercharge nor
NOTE: All of these systems must be connected in strict accordance with the instructions in this document. Failure to install this equipment per these instructions will void the warranty.
P1005089 Rev. C | pg. 3 of 13 |