Model UCLI72-4 Quad Charger

Figure 5: Quad Charger

Power Supply

1.Slide Battery Pack into Charger bay

2. Rock Battery Pack into place

Fast

 

 

Charge

Full

Charge

Fault

 

 

 

Ready

Fast

 

 

Charge

Full

Charge

Fault

 

 

 

Ready

Fast

 

 

Charge

Full

Charge

Fault

 

 

 

Ready

Amber

Indicator

Fast

 

 

Charge

Full

Charge

Fault

 

 

 

R

Power

 

eady

 

 

Charger Bay

Green

Indicator

Power Indicator

The UCLI72-4 Quad Charger is designed to charge up to four QL series battery packs simultaneously. Batteries must be removed from the printer to be charged in the Quad Charger.

1.Ensure that the charger has been installed properly per the Quad Charger instruction manual. Ensure that the power indicator on the front panel is on.

2.Remove any protective shrink-wrap and labels from all battery packs prior to use. Plug a battery pack into any one of the four charging bays as shown in Figure 5, noting the orientation of the battery pack. Slide the battery pack into the charging bay until it stops and then rock the battery pack back until it snaps into place. The amber indicator di-

continued

15

QL Plus Series User Guide