Label Specifications

Parameter

QL220 Plus

QL 320 Plus

QL 420 Plus

 

 

 

 

Label or Tag Width

Max. Label/ Tag Length (w/std. memory)

Inter-label Gap.

Label Thickness

Tag Thickness

Max. Label Roll dia.

Label Inner Core

Black Mark Dimensions

Media Requirements

0.75 in. to 2.12 in.

1.5 in. to 3.1 in.

2 in. to 4.1

(16 to 53.8 mm)

(38.1 to 78.4 mm)

in. (50.8 to

 

 

104.1 mm)

20 in. (508 mm)

16 in. (406.4 mm)

20 in. (508 mm)

0.08in. to 0.16 in. (.12 in. preferred) (2 mm to 4 mm, 3 mm preferred)

0.0025 in to 0.0065 in (0.064 mm to .165 mm)

0.0060 in. (0.152 mm) maximum

2.20 (55.8 mm)

2.63 in. (66.8 mm) O.D.

O.D.

 

 

 

0.75in. (19 mm) minimum dia;

1.38in. (35.05 mm) minimum dia. for linerless media (QL 420 Plus accepts linerless media on 0.75 in. cores.)

The reflective media black marks should extend past the center-line of the roll.

Minimum mark width: 0.5 in. (12.7 mm) perpendicular to edge of media, centered within the width of the roll.

Mark length: 0.094 in. (2.4 mm) parallel to edge of media

Use Zebra brand direct thermal media that is outside wound. Media may be reflective (black mark) sensing, or transmissive (gap) sensing, die-cut, continuous, or linerless. QL 420 Plus models will accept fanfold media if used with an external media supply.

For die-cut labels, use only full auto dies.

68

QL Plus Series User Guide