Zenith C-30HDG manual Bearing Installation, Bearing/Cam Bushing Installation

C-30HDG PUMP — MAINTENANCE (PUMP)

Bearing Installation

1.Installthebearingcomponentsonthecrankshaftmakingfull contact with the back side of the crank disc as indicated the symbol #. See Figure 24 below.

2.Install the bushing in the cam weldment and slide it onto the crankshaft until contact is made with the bearing spacer.

3.Tighten the 3 allen head bolts “A” while exerting pressure on the bushing towards the bearing spacer.

It is important that the Bearing Assembly is installed properly.

Figure 24. Bearing/Cam Bushing Installation

PAGE 42 — MAYCO C-30HDG PUMP — OPERATION AND PARTS MANUAL — REV. #6 (04/02/12)