C-30HDG PUMP — RULES FOR SAFE OPERATION

■CAUTION must always be observed while servicing this pump.Rotating parts can cause injury if contacted.

■ALWAYS stored the pump in a clean, dry location out of the reach of children.

■ALWAYS use extreme care when operating near obstructions, on slippery surfaces, grades and side slopes.

■Unauthorized equipment modifications will void all warranties.

■Refer to the Engine Owner's Manual for engine technical questions or information.

■Before start-up, check the hopper and remove all obstructions.

■Keep all hands out of the hopper when the engine is running.

■DO NOT operate the pump with the hood open.

■Replace any worn or damaged pump components immediately.

■ALWAYS turn the engine OFF before performing must be before performing maintenance.

■ALWAYS make sure pump is correctly secured to the trailer. Check all supports attaching the pump to the trailer and make sure they are tight.

■ALWAYS make sure that the pump's trailer is placed on solid level ground so that it cannot slide or shift around, endangering workers. Place blocks under the trailer's bumper to make it level (prevents tipping), and use a chocked block underneath the wheels to prevent rolling. Also keep the immediate area free of bystanders.

■Before towing, check the hitch and secure the safety chain to the towing vehicle. Also check for proper tire pressure.

■Tow only with a vehicle and hitch rated to tow a 2,950 lbs. (1,338 Kg) load.

■If pump is equipped with ball hitch coupler, use only a 2” all steel ball rated for a minimum of 5000 lbs. Use a 1” hardened steel pull pin, if the pump is equipped with a pin hitch.

■ALWAYS check the machine for loosened threads or bolts before starting.

■A copy of this manual shall accompany the pump at all times.

■DO NOT use worn out hoses or couplings; inspect daily.

■DO NOT disconnect the hose couplings or nozzle while they are under pressure. Relieve the pressure by manually swinging the clamp arm latch handle to the first open position at the exhaust cone outlet.

■The pump should NEVER be towed in excess of 45 MPH (or less depending on road conditions).

■If hose lines are blocked for any reason, or if the lines are kinked when starting up or during pumping cycle, the pump pressure could straighten out the kink or force out the blockage. This rapid surge of material could cause the lines to move or whip in a manner that could cause injury to personnel.

■Inspect the hose lines at all times

■DO NOT tow the pump with the hopper full of material.

■DO NOT tow the pump with the hoses attached.

■NEVER disconnect any emergency or safety devices. These devices are intended for operator safety.Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection of any of these devices will void all warranties.

■ALWAYS make sure the delivery system used, pipe hose clamps ect., exceed the rated pressure of the pump. In addition the pumping system should be checked for worn components prior to start up. Use snap pins on all snap couplings.

MAYCO C-30HDG PUMP — OPERATION AND PARTS MANUAL — REV. #6 (04/02/12) — PAGE 11

Page 10 Page 12
Page 11
Image 11
Zenith C-30HDG manual 30HDG Pump Rules for Safe Operation, Do not use worn out hoses or couplings inspect daily
Page 10 Page 12

C-30HDG specifications

The Zenith C-30HDG is a standout in the world of gaming monitors, tailored specifically for gamers who seek both high performance and stunning visuals. This monitor excels in delivering a riveting experience, combining advanced technology with robust features that cater to the needs of competitive gamers and casual enthusiasts alike.

One of the main features of the Zenith C-30HDG is its impressive 30-inch display size, providing an immersive gaming experience with ample screen real estate. With a resolution of 2560 x 1080 pixels, this ultrawide monitor offers a 21:9 aspect ratio, which expands the field of view in games, allowing players to spot enemies and navigate expansive environments more effectively. The curved design further enhances immersion, wrapping the visuals around the viewer's peripheral vision.

Another key characteristic of the Zenith C-30HDG is its rapid 200Hz refresh rate, enabling smooth motion and reduced motion blur during high-paced gaming sessions. This feature is particularly beneficial for fast-action games, where every millisecond counts. Complementing the refresh rate is a low response time of 1ms, ensuring that ghosting effects are minimized, resulting in crisp visuals even during intense gameplay.

The monitor supports AMD FreeSync and NVIDIA G-Sync technologies, which work to eliminate screen tearing and stuttering, providing a seamless and tear-free gaming experience. Whether users are playing an action-packed shooter or an expansive role-playing game, the display's adaptive synchronization ensures that they stay fully engaged without distractions.

In terms of connectivity, the Zenith C-30HDG is well-equipped with multiple HDMI and DisplayPort inputs, making it easy to connect to a variety of devices, including gaming consoles, PCs, and laptops. This versatility caters to gamers who utilize multiple platforms for their gaming experiences.

The Zenith C-30HDG also integrates advanced color accuracy features, supporting a wide color gamut with rich and vibrant colors that bring games to life. With built-in settings for different gaming genres, users can optimize their visual experience based on the type of game they are playing.

In conclusion, the Zenith C-30HDG is a remarkable gaming monitor that offers an outstanding combination of size, resolution, and advanced technologies. Its features cater not only to competitive gamers seeking the best performance but also to casual gamers who appreciate breathtaking visuals. With the Zenith C-30HDG, gamers can elevate their experience and fully immerse themselves in their favorite worlds.
Top Page Image Contents