C-30HDG PUMP — MAINTENANCE (PUMP)

Assembling and Disassembling Drive Chain

CAUTION - DRIVE CHAIN SAFETY

You may be seriously injured if you attempt to install the drive chain while the pump is running. Turn OFF the engine and lock out gears and sprockets before attempting installation.

Once installed, the drive chain must be guarded to prevent personal injury or properly damage in the event the chain separates during operation. NEVER run pump with drive chain guard removed.

CAUTION - Eyesight Hazard

The components of the drive chain are hardened parts.Striking these parts may cause metal chips to break off from the chain or the tools used resulting in personal injury.

During all stages of chain disassembly and assembly, wear safety glasses to prevent metal parts or chips from entering your eyes and have personnel in the immediate area do likewise.

Chain-Link Pin Removal

1.If chain is of cotter pin- type construction, remove cotters.

2.Ifchainisrivetedtypeconstruction,grindpinheadsoffsopin ends are flush with the linkplate.

3.Drive pins out of linkplate using a Diamond pin extractor Model P/N 113 or 135. Some multiple strand chains or large pitch models will require a hammer and punch or a press to remove the pins.

Installation Of Coversides

Diamond Chain coversides are manufactured three different ways:

■Slip Fit

■Modified Press Fit

■Full Press Fit

Modified and Full Press Fits require some patience and tools to assemble and/or disassemble. Use vice grips, plumbers pliers or a small hammer to drive coversides onto pins.

Installation of Spring Locks and Cotter-Pins

After coversides have been installed, install spring locks or cotters (depending on chain design).Avoid using bent or worn cotters or spring locks. After spring locks (or cotters) are installed, lightly tap pin ends to position these parts snug against the coverside for additional support.

Tips To Remember

■Chian will break if mused or abused

■Serious injury or property damage can result if chain is installed incorrectly.

■Select, install, guard and maintain chain in accordance with equipment manufacturer and "Diamond Chain Company's recommendations.

■Read chain assembly instructions before attempting to install chain on pump sprocket wheel.

■Knowing more about how the chain is constructed may help in assembly and disassembly. Further information may be obtained by calling or writing Diamond Chain CompanyTM.

MAYCO C-30HDG PUMP — OPERATION AND PARTS MANUAL — REV. #6 (04/02/12) — PAGE 47

Page 46 Page 48
Page 47
Image 47
Zenith C-30HDG manual Assembling and Disassembling Drive Chain, Chain-Link Pin Removal, Installation Of Coversides
Page 46 Page 48

C-30HDG specifications

The Zenith C-30HDG is a standout in the world of gaming monitors, tailored specifically for gamers who seek both high performance and stunning visuals. This monitor excels in delivering a riveting experience, combining advanced technology with robust features that cater to the needs of competitive gamers and casual enthusiasts alike.

One of the main features of the Zenith C-30HDG is its impressive 30-inch display size, providing an immersive gaming experience with ample screen real estate. With a resolution of 2560 x 1080 pixels, this ultrawide monitor offers a 21:9 aspect ratio, which expands the field of view in games, allowing players to spot enemies and navigate expansive environments more effectively. The curved design further enhances immersion, wrapping the visuals around the viewer's peripheral vision.

Another key characteristic of the Zenith C-30HDG is its rapid 200Hz refresh rate, enabling smooth motion and reduced motion blur during high-paced gaming sessions. This feature is particularly beneficial for fast-action games, where every millisecond counts. Complementing the refresh rate is a low response time of 1ms, ensuring that ghosting effects are minimized, resulting in crisp visuals even during intense gameplay.

The monitor supports AMD FreeSync and NVIDIA G-Sync technologies, which work to eliminate screen tearing and stuttering, providing a seamless and tear-free gaming experience. Whether users are playing an action-packed shooter or an expansive role-playing game, the display's adaptive synchronization ensures that they stay fully engaged without distractions.

In terms of connectivity, the Zenith C-30HDG is well-equipped with multiple HDMI and DisplayPort inputs, making it easy to connect to a variety of devices, including gaming consoles, PCs, and laptops. This versatility caters to gamers who utilize multiple platforms for their gaming experiences.

The Zenith C-30HDG also integrates advanced color accuracy features, supporting a wide color gamut with rich and vibrant colors that bring games to life. With built-in settings for different gaming genres, users can optimize their visual experience based on the type of game they are playing.

In conclusion, the Zenith C-30HDG is a remarkable gaming monitor that offers an outstanding combination of size, resolution, and advanced technologies. Its features cater not only to competitive gamers seeking the best performance but also to casual gamers who appreciate breathtaking visuals. With the Zenith C-30HDG, gamers can elevate their experience and fully immerse themselves in their favorite worlds.
Top Page Image Contents