English

 

Français

 

 

9. Maintenace

9. Entretien

 

 

 

 

 

MA1

■BLADE

•Check the blade and the fasteners for looseness, cracking, or bending.

•Check the cutting edges and reform with a flat file.

(A)Saw blade

(B)8-teeth blade

(C)4-teeth blade

Point (MA1):

1.Keep the end corner sharp.

2.Round the root of the edge, using round file.

3.Do not use water when using a grinder.

■LAME

•Vérifier que la lame est bien serrée, ni craquée ou tordue et que sa fixation est en bon état.

•Vérifier le bord de coupe et l’affûter avec une lime plate.

(A)Lame de scie

(B)Lame à huit dents

(C)Lame à quatre dents

Point (MA1):

1.Maintenir les coins bien pointus.

2.Arrondir la base des dents à l’aide d’une lime ronde.

3.Ne pas utiliser d’eau avec une meule.

MA2

(1)

MA3

(1)

MA4

0.6 – 0.7mm

IMPORTANT

•It is recommended that filing should be done by professionals.

•Especially regarding filing the saw blade, Leave it to the professionals.

■AIR FILTER

•The air filter, if clogged, will reduce the engine performance. Check and clean the filter element in warm, soapy water as required. Dry completely before installing. If the element is broken or shrunk, replace with a new one. (MA2)

(1) Air filter

■FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage. (MA3)

(1) Fuel filter

■SPARK PLUG

•Starting failure and mis-firing are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a replacement plug, use the correct type specified by KOMATSU ZENOAH. (MA4)

•REPLACEMENT PLUG IS A NGK CMR7A.

IMPORTANT

•Note that using any spark plug other than those designated may result in the engine failing to operate properly or in the engine becoming overheated and

IMPORTANT

•l est recommandé que l’affûtage soit fait par un professionnel.

•Surtout pour les lames scie, laissez ceci à un professionnel.

■FILTRE A AIR

•Si le filtre à air est colmaté, la performance du moteur en sera réduite. Vérifier et nettoyer l’élément de filtre avec de l’eau savonneuse tiède. Le sécher complètement avant de le réinstaller. Si l’élément de filtre est cassé ou rétréci, le remplacer par un neuf (MA2).

(1) Filtre à air

■FILTRE A CARBURANT

•Si l’essence n’arrive plus au carburateur, vérifier que l’évent du bouchon de réservoir et le filtre à carburant ne sont pas bouchés. (MA3)

(1) Filtre à carburant

■BOUGIE D’ALLUMAGE

•Les démarrages sans succès et les ratés d’allumage du moteur sont souvent causés par une bougie encrassée. Vérifier l’état de la bougie et le jeu de ses électrodes. Comme bougie de rechange, n’utiliser que le type approprié spécifié par KOMATSU ZENOAH. (MA4)

•LE TYPE DE BOUGIE DE REMPLACEMENT EST UNE NGK CMR7A.

IMPORTANT

•Prendre note que l’utilisation d’un type de bougie différent peut causer des

48

Page 46 Page 48
Page 47
Image 47
Zenoah BCZ2600DL manual Maintenace Entretien, MA1, MA2 MA3 MA4
Page 46 Page 48

BCZ2600DL specifications

The Zenoah BCZ2600DL is a high-performance brush cutter designed for both professional landscapers and dedicated home users. This powerful tool combines efficiency with ergonomic design, making yard work not only effective but also manageable and comfortable. Its robust engine, advanced features, and user-friendly interface all contribute to its stature as a leading choice in the market.

At the heart of the BCZ2600DL lies a reliable 25.4cc, two-stroke engine that delivers impressive power while remaining lightweight. This engine is engineered for fuel efficiency, reducing the environmental impact and allowing users to work longer without frequent refueling. The tool is designed for easy starting, thanks to a convenient primer bulb and an advanced ignition system that ensures reliable performance in various conditions.

One of the standout features of the BCZ2600DL is its unique Anti-Vibration System. This technology minimizes vibrations during operation, significantly reducing user fatigue and allowing for longer work sessions without discomfort. The ergonomic handle design further enhances comfort, giving users better control and reducing strain on the arms and shoulders.

The brush cutter is equipped with a dual-line bump feed head that allows for quick and easy line advancement, making it ideal for trimming grass and clearing weeds. The 26.2cc engine provides enough power to tackle tougher vegetation, including brush and dense undergrowth, making it versatile for various landscaping projects. Additionally, the heavy-duty cutting attachment ensures durability and longevity, even under rigorous usage.

Another remarkable characteristic of the Zenoah BCZ2600DL is its lightweight construction. Weighing in at around 10 pounds, it is easy to maneuver, making it perfect for both professional landscapers who need to cover large areas and homeowners tackling smaller jobs. The detachable shaft allows for compact storage and easy transport, another plus for users on the go.

In terms of safety, Zenoah has integrated several features to protect users while working. The throttle trigger is equipped with a safety lock, preventing accidental starts, and the exhaust system is designed to minimize emissions for a cleaner environment.

In summary, the Zenoah BCZ2600DL brush cutter stands out in the outdoor power equipment market due to its combination of a powerful yet fuel-efficient engine, comfort-driven designs, advanced technologies, and user-friendly features. Whether you're trimming your backyard or tackling a more extensive landscaping job, the BCZ2600DL is built to meet and exceed expectations.
Top Page Image Contents