SE1
SE2
SE3
English
6. Set up
■INSTALLING HANDLE (SE1)
•Mount the handle to the shaft tube and clamp it at your best operating position.
■INSTALLING DEBRIS GUARD (SE2)
•This model pack with already installing debris guard.
•Put the debris guard on the shaft tube near the gear box, attach it with the screw, washer and nut provided.
■INSTALLING CUTTING HEAD (SE3)
1.While locking the gear shaft by inserting the attached bar into the upper holder and the housing.
2.Rotate the cutting head to engage threads. Hand- tighten it securely.
18
