Zenoah TR2301S manual Set up, English, SE1 1 SE2 SE3, Connecting Switch Wires, Installing Handle

English

6. Set up

SE1

(1)

SE2

SE3

■CONNECTING SWITCH WIRES

•Connect the switch wires between the engine and the main unit. Pair the wires of the same color.

■INSTALLING HANDLE

•Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. (SE1)

(1) About 11 inches (28cm)

■INSTALLING DEBRIS GUARD

•Put the debris guard on the gear box, attach it with the screws and hardware provided. (SE2)

■INSTALLING CUTTING HEAD (SE3)

1.While locking the gear shaft, by inserting the supplied tool into the upper holder on the gear box, loosen and remove the hexagon nut(left-handed)

2.Fit the line head assembly to the gear shaft over the holders. Hand-tighten it securely.

IMPORTANT

You need not holder (B) and nut when installing the cutting head.

18