Zenoah TR2301S manual 3 1 2, Optional blade usage, A B C D, English

English

12. Optional blade usage

WARNING

OPT5

(A)

(B)

(C)

(D)

OPT6

OPT7

(1)	(3)	(5)	(7)
(2)	(4)
		(6)

(3)

(1)

(2)

•When sharpening, removing, or reattaching the blade, be sure to wear thick, sturdy gloves and use only proper tools and equipment to prevent injury.

■CHOOSE THE BLADE

Choose a suitable recommended cutting attachment according to the object to be cut. (OPT5)

•When replacing blade always be sure to use products which have been certified by RedMax.

(1)9” 22-tooth : SST229

(2)9” 24-tooth : SST249

(3)8” 8-tooth : SGB088

(4)9” 8-tooth : SGB089

(5)8” 4-tooth : SGB048

(6)9” 4-tooth : SGB049

(7)Nylon line head

(A)Under growth

(B)Heavy weeds

(C)Light weeds

(D)Grass

■SET UP THE BLADE

1.Detach the line head assembly. (OPT6)

2.Put on the blade, making the marked side face the shaft side, put the holder and the cover on, and fasten the blade with the nut. (OPT6)

TIGHTENING TORQUE :

130~174 in-lbs (14.7~19.6 N.m.)

(1) Cover : 3540-13283

(2)Holder (B) : 6019-13250 (STANDARD)

(3)Nut : T3002-13260 (STANDARD)

■BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head just touching on the ground. (OPT7)

■STARTING THE ENGINE

Please refer 5.For safe operation (P.12), 8.Operation (P.26).

WARNING

•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment could

44