Note1: A cable lock (not included) may be re- quired by local codes. Please review local co- des for more information.
6.Reinstall the cover on the motor housing by following the instructions from step 2 in re- verse order.
7.Attach 6 pin male molex connectors to 6 pin female molex connectors inside blower hou- sing. See Fig. 6
Note2: Check local codes to determine mini- mum wire gauge.
See manual included with external and in- line blower for instructions on installing the blower.
Installation - External & In-Line Blower Preparation
- 15 -