6.Attach the 6 pin male molex connector from blower wire to the 6 pin female molex con- nector located inside the blower housing. See Fig.6
7.Install the motor and bracket, inside the motor housing, completing the installation using the other screws (6 type B )that have been sup- plied. (Tot. 13 type B). Fig. 7
8.Connect 9 pin male molex connector from blower wire to 9 pin female molex connector on the capacitor wire. See Fig.8
WARNING! Place electrical wiring inside the blower hou- sing.
The hood is now ready to be installed on the wall.
Installation - Internal Blower
- 13 -