Zephyr ZGE-E36AS290, ZGE-E30AS290 manual Installation - Preparing the Cabinet, 7 3/4”

7”

7 3/4”

19-7/8”

9

-

7/8”

C/L

9/16”

1-

Fig.1

front edge

glass handle

Fig.2

1.Determine and mark center line on wall and cabinet bottom with a pencil.

2.If the cabinet bottom is recessed, wood blocking must be installed to ensure proper alignment of the hood with the cabinet bottom. Wood blocking should be fl ush within cabinet bottom.

3.Follow the dimensions in Fig.1 and cut-out the bottom of your cabinet to create an opening for the hood to fi t through. If you have a frameless cabinet begin the 1-9/16” measurement (referenced in Fig.1) from front of the cabinet door. This way the front edge of the hood will be fl ush with the cabinet doors when closed, see Fig.2.

Installation – Preparing the Cabinet

9