Zephyr ZGE-E36AS290 Hood and Filter Cleaning, Surface Maintenance, Decorative Mesh Filters

SURFACE MAINTENANCE:

Periodically clean with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent steel wool or scouring pads which will scratch and damage surface.

For heavier soil use liquid degreaser.

After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners to polish and buff out the stainless luster and grain. Always scrub lightly with clean cotton cloth and with the grain.

Do not use any product containing chlorine bleach. Do not use “orange” cleaners.

Decorative Mesh Filters

The mesh fi lter installed by the factory is intended to fi lter out residue and grease from cooking. It need not be replaced on a regular basis but is required to be kept clean.

Filter should be cleaned after every 30 hours of use or once a month.

Remove and clean by hand or in dishwasher on low heat. Spray degreasing detergent and leave to soak if heavily soiled.

Hood and Filter Cleaning

Dry fi lter and re-install before using hood.

Replacing Mesh Filter

Should fi lter wear out due to age and prolonged use, replace with the following part number:

Hood Model:	Part No.	Qty. to Order.
All ZGE Models	50200036	1

Replace any damaged fi lter that has punctured or broken mesh or damaged frame.

To remove decorative mesh fi lter:

1.Pull down on handle.

2.Tilt fi lter down and remove from hood.

1

2

Maintenance –

17