Zhone Technologies manual Mounting Brackets, Mounting Configurations, 4821-A2-ZN21-30, z z z

Mounting Configurations

Mounting Configurations

Three basic installation configurations are available:

z

z

z

Rack mount – see Installing the Brackets for Rack Mounting on page 17 and Installing the BitStorm 4800 Express Into a Rack on page 19.

Wall mount – see Installing the BitStorm 4800 Express on a Wall on page 21.

Shelf or desktop – see Installing the BitStorm 4800 Express on a Shelf or Desktop on page 23.

Mounting Brackets

Your BitStorm 4800 Express can be installed in a rack or on the wall using mounting brackets. Two brackets suitable for a 19-inch (483 mm) rack (marked EIA-19) and two brackets suitable for a 23-inch (584 mm) Bay Networks or Nortel rack (marked with Paradyne Part Number

868-6282-0020) are shipped with the unit. Two brackets suitable for a 21-inch (535 mm) rack (marked ETSI) are available from Paradyne as a separate feature (see Appendix B-,Equipment List).

Rack-mounting brackets may also be used to attach the unit to a wall.

NOTE:

In this guide, the term rack refers to any rack, cabinet, frame, or bay suitable for mounting telecommunications equipment.

Installing the Brackets for Rack Mounting

To install the mounting brackets for rack mounting:

1Locate the black screw nearest the front panel on each side of the unit, as shown.

CONSOLE	PORT1	PORT2
	10/100BT
		10/100BT

STATUSALARMTEST

1 3 5 7

2 4 6 8

9 11 13 15

10 12 14 16

17 19 21 23

18 20 22 24

25 27 29 31

26 28 30 32

33

34

35 37

36 38

39 41 43 45

40 42 44 46

47

48

DSL PORTS 1-24

O	4
DSL
PORTS 25-48

04-17525

2Remove these two black screws (one from each side) before attempting to install the mounting brackets.

4821-A2-ZN21-30 BitStorm 4800 Express Model 4821-A2 Installation Guide 17