Zhone Technologies 4821-A2 manual DSL Ports

Cabling

DSL Ports

The BitStorm 4800 Express DSL connector supports the tip and ring connections of up to 24 DSL ports over a 50-position cable. There are two DSL connectors on the 48-port model.

You must connect the unit to a separate POTS splitter. The Model 6051 POTS Splitter must be used for customer premises applications in Canada.

To cable the DSL Ports:

1Insert a cable tie (provided) through the top of the anchor mount next to the DSL PORTS 1–24 connector.

2If the connector for your cable has a short captive screw, attach the cable to the DSL PORTS 1–24 connector and fasten it to the jack screw with its short captive screw.

#4-40	Anchor
Jack Screw	Mount

Short

Screw

50-Pin

Connector02-17083

3If the connector for your cable has a long captive screw, remove the provided jack screw from the threaded hole next to the DSL PORTS 1–24 connector. Attach the DSL PORTS 1–24 connector to the unit using the long, captive pan-head screw (provided).

Anchor

Mount

Long

Screw

50-Pin02-17346

Connector

4Tighten the cable tie around the connector and trim the excess.

02-17084

5For a 48-port model, repeat Step 1 through Step 4, substituting DSL Ports 25–48 for DSL PORTS 1–24.

26 BitStorm 4800 Express Model 4821-A2 Installation Guide 4821-A2-ZN21-30